LV Handbook › Wiring diagrams › Network › Ubiquiti › EAV-Fiber

Ubiquiti EAV-Fiber

Ubiquiti Switch Enterprise Audio/Video Fiber

Part page

Suggest a correction

Suggest a correction

An account is required. Reports stay private until a correction is published.

Switch Enterprise Audio/Video Fiber

Ubiquiti EAV-FiberUbiquiti EAV-Fiber Wiring diagram.Ubiquiti EAV-FiberSwitch Enterprise Audio/Video FiberEAV-FiberTerminalsT1Source → EAV-Fiber → Field deviceSource+ −EAV-FiberT1T2Field devicefield wiring

Key specs

FanTrue
MAC256
PSUTrue
SMA1 (GPS input for Grandmaster clock mode)
IPv4256
SFP+True
PTPv2True (PTPv2 is not supported over aggregated ports)
QSFP28True
WeightWithout mounting brackets: 8.95 kg (19.7 lb) With mounting brackets: 9.05 kg (20 lb)
Console1
Layer 3True
10G SFP+20 (10G/1G)
EthernetTrue
LLDP MEDTrue
Store SKUEAV-Fiber
1 GbE RJ451 (1G/100M/10M)
DHCP RelayTrue
Dimensions442.4 x 480 x 43.7 mm (17.4 x 18.9 x 1.7")
Fan Method(4) Hot-swappable fan modules (Fan modules operate with 3 + 1 redundancy)
ManagementEthernet AR Serial Console
QoS (DSCP)True
Redundancy(2) Hot-Swappable PSUs (4) Hot-Swappable Fans
STP & RSTPTrue
Voice VLANTrue
100G QSFP282 (100G/40G) (Breakout cables are not supported)
Form FactorRack Mount (1U, Full-Depth) (Requires a 4-post rack, or a center-mount bracket or cantilever shelf on 2-post racks for optimal support)
LCM Display1.3" touchscreen
Flow ControlTrue
Jumbo FramesTrue
Power Method(2) Universal input, 100–240V AC, 50/60 Hz
Power Supply(2) Hot-swappable AC/DC 150W power modules
IGMP SnoopingTrue
Storm ControlTrue
802.1X ControlTrue
CertificationsCE, FCC, IC
ESD ProtectionAir: ± 12KV, contact: ± 8KV
Mount MaterialSGCC steel
NDAA CompliantTrue
Port IsolationTrue
Port MirroringTrue
Forwarding Rate595 Mpps
Loop ProtectionTrue
Supported VLANs1,000
Etherlighting™True
Heat Dissipation512 BTU/hr
Egress Rate LimitTrue
Enclosure MaterialSGCC steel
IPv4 Static Routes512
Packet Buffer Size8 MB
Power Input Method(2) AC input, Hot-swappable power modules
Switching Capacity800 Gbps
IEEE 1588-2008 PTPv2True
MAC Address BlockingTrue
Supported Rack Depth482.6 mm (19") four-post racks Posts depths ranging from 650 to 1,000 mm (25.6–39.4”)
LACP Port AggregationTrue
MAC Address Table Size32,000
Max. Power Consumption150W
Supported Voltage Range100–240V AC
DHCP Snooping & GuardingTrue
Virtual Network OverrideTrue
Ambient Operating Humidity10 to 90% noncondensing
MAC-Based Port RestrictionTrue
DHCP Server (Local Networks)True
Ambient Operating Temperature-5 to 40° C (23 to 104° F)
Total Non-Blocking Throughput400 Gbps
Configurable PTP Domain NumberTrue
Static Routing (Local Networks)True
End-to-End (E2E) Delay MechanismTrue
IP-Based ACLs & Network IsolationTrue
MAC-Based ACLs & Device IsolationTrue
Inter-VLAN Routing (Local Networks)True
Multicast & Broadcast Rate LimitingTrue
Announce Receipt Timeout from 2 to 9True
Boundary Clock Operation: Two-step OnlyTrue
Layer 2 Ethernet and UDP/IPv4 TransportTrue
BMCA with Configurable Priority1 and Priority2True
Profiles: IEEE1588, SMPTE 2059-2, AES67, and AES-R16True
Hardware Timestamping on All Ethernet and QSFP28 PortsTrue
Sync, Announce, and Delay Request Intervals from −3 to +4True
Advanced IGMP Configuration (Querier, Fast Leave, Router Port)True
Clock Roles: Grandmaster, Boundary Clock, and Transparent ClockTrue
Pro AV Profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron)True

How to wire it

  1. Follow the Ubiquiti EAV-Fiber install guide.

Source

eav-fiber

Add to layout

Community questions

No questions tagged to this page yet.

Unanswered