Ubiquiti Access G2 Reader
Access G2 Reader
| NFC | NFC |
|---|---|
| LEDs | R/G/B/W <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a> |
| Button | (1) Factory reset |
| Weight | 82 g (2.9 oz) |
| Sensors | Proximity sensor |
| Speaker | True ((1) 0.7W) |
| Mounting | In-wall, gang box (Included) Junction box (Optional) |
| Store SKU | UA-G2 |
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") |
| Connectivity | BLE 4.1 NFC |
| Power Method | PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU |
| UL 294 Level | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I |
| Weatherproof | Outdoor Exposed |
| Mobile Unlock | True |
| NFC Frequency | 13.56 MHz |
| Certifications | CE, FCC, IC, SRRC, UL 294, CAN/ULC-60839-11-1 |
| Mount Material | Aluminum alloy |
| NDAA Compliant | True |
| NFC Read Range | < 30 mm (1.18'') |
| NFC Technology | ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T |
| Physical Unlock | Handwave Unlock |
| Weatherproofing | IP55 |
| UL 294 Statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| ESD/EMP Protection | Air: ± 15kV, contact: ± 8kV |
| Enclosure Material | Polycarbonate, glass |
| Networking Interface | (1) 10/100 MbE RJ45 port |
| Software Information | The software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a> |
| Indoor and Outdoor Use | Yes |
| Management Application | Access |
| Max. Power Consumption | 5W |
| Supported Voltage Range | 48V DC |
| UniFi Application Suite | Access |
| CAN/ULC-60839-11-1 Grade | Grade assignment: I |
| Handwave Request to Exit | True |
| NFC Card & Keyfob Access | True |
| PoE Cabling Requirements | Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable. |
| Ambient Operating Humidity | 5 to 90% noncondensing |
| Ambient Operating Temperature | -30 to 45° C (-22 to 113° F) |
| Document number, and issue date and/or revision level | UA-G2/UA-G2-Black, V02 |
No questions tagged to this page yet.