Ubiquiti Switch Industrial DIN 8
Switch Industrial DIN 8
| MAC | 128 |
|---|---|
| SFP | True |
| IPv4 | 128 |
| 1G SFP | 2 |
| System | True |
| Weight | Without mount: 870 g (1.9 lb) With mount: 890 g (2 lb) |
| Console | 1 |
| Ethernet | True |
| LLDP MED | True |
| Store SKU | USW-Industrial-DIN-8 |
| 1 GbE RJ45 | 8 |
| Dimensions | 139 x 100 x 52 mm (5.5 x 3.9 x 2.1") |
| Management | Ethernet Serial Console |
| Redundancy | (2) DC inputs |
| STP & RSTP | True |
| Voice VLAN | True |
| Form Factor | Compact DIN rail and wall-mountable (Mounts included) |
| Flow Control | True |
| Jumbo Frames | True |
| Power Method | (2) 2-pin DC inputs with terminal block (Power supply not included) |
| IGMP Snooping | True |
| Storm Control | True |
| 802.1X Control | True |
| Certifications | CE, FCC, IC |
| ESD Protection | Air: ± 15kV, contact: ± 8kV |
| Mount Material | Polycarbonate |
| NDAA Compliant | True |
| Port Isolation | True |
| Port Mirroring | True |
| Forwarding Rate | 14.88 Mpps |
| Loop Protection | True |
| Supported VLANs | 1,000 |
| Egress Rate Limit | True |
| Enclosure Material | Aluminum |
| Packet Buffer Size | 0.5 MB |
| Power Input Method | DC input |
| Switching Capacity | 20 Gbps |
| MAC Address Blocking | True |
| LACP Port Aggregation | True |
| MAC Address Table Size | 8,000 |
| Max. Power Consumption | 12W |
| Supported Voltage Range | 12–60V DC |
| DHCP Snooping & Guarding | True |
| Virtual Network Override | True |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| MAC-Based Port Restriction | True |
| Ambient Operating Temperature | -30 to 70° C (-22 to 158° F) |
| Total Non-Blocking Throughput | 10 Gbps |
| IP-Based ACLs & Network Isolation | True |
| MAC-Based ACLs & Device Isolation | True |
| Multicast & Broadcast Rate Limiting | True |
| Advanced IGMP Configuration (Querier, Fast Leave, Router Port) | True |
No questions tagged to this page yet.