VISTA-20P how to set entry delay
Set Resideo VISTA-20P Entry Delay #1 in data field *35 .
Steps
From: VISTA-20P/15P Security Systems programming guide, p. 8
- Program *35 Entry Delay #1 for Partition 1 and Partition 2
- Enter 00–96 for 0–96 seconds, 97 for 120 seconds, 98 for 180 seconds, or 99 for 240 seconds
Specs & limits
From: VISTA-20P/15P Security Systems programming guide, p. 8
| Note | Shown value is 30 seconds for Partition 1 and Partition 2. |
|---|---|
| Note | Common zones use the same delay as Partition 1. |
| VISTA-20PSIA/VISTA-15PSIA | SIA minimum is 30 seconds; an entry under 30 becomes 30 seconds. 97 = 120 seconds, 98 = 180 seconds, 99 = 240 seconds. |
| UL Residential Burglary Alarm | maximum 30 seconds; entry delay plus dial delay should not exceed 1 minute. |
| UL Commercial Burglar Alarm | total entry delay may not exceed 45 seconds. |
Applies to
VISTA-20P
Sources
- VISTA-20P/15P Security Systems Programming Guide, p. 8 (K5305-1PRV9 Rev B)