Wisenet Device Manager Download
What it is
Wisenet Device Manager is Hanwha Vision's tool for managing Hanwha network devices in bulk. It discovers Hanwha devices on the network and changes their IP addresses, creates groups, generates reports, configures key camera settings, previews live video, sets PTZ positions, focuses cameras in bulk and saves device configurations and templates for large installations. It also handles firmware upgrades, configuration backup and restore, and HTTPS and IEEE 802.1X certificates. Source
Works with
| Hanwha Vision (Wisenet) network cameras | Discovery, IP and password setup, firmware, focus and camera settings Source |
|---|---|
| Hanwha recorders and other network devices | Discovered on the same network; devices on other networks can be added manually by IP range Source |
System requirements
| Operating system | Windows 7, 10 or 11 (64-bit) |
|---|---|
| Included software | .NET Framework 4.7.2 and Visual C++ 2010 Redistributable (x86), bundled with the installer |
| Processor | Intel Core i5 8th generation or higher |
| Memory | 8 GB DDR4 or more |
| Display | 1366 x 768 |
| Network ports | HTTP 80, HTTPS 443, RTSP 554 |
From the Hanwha Vision Device Manager white paper.
How to install
- Download Wisenet Device Manager from the Hanwha Vision tools page.
- Double-click the installer and choose the installer language.
- Accept the license agreement, choose the destination folder and click Install.
- Click Finish when the install completes.
From the Hanwha Vision Device Manager white paper.
How to find devices and set their IP addresses
- Click Search. Devices on the same network as the PC are listed. If a device has no password yet, Device Manager prompts you to set an initial password.
- For devices on another network, add them manually with model, IP range, ports, ID and password.
- Select a device, click Credential, enter the admin user ID and password, and click Apply.
- Select the device and click IP Assign. Choose Obtain an IP address automatically (DHCP), or Assign the following IP address and enter the address, then click Apply.
- For several devices, select them all, click IP Assign, enter the starting address, click Simulate, check the result and click Apply.
From the Hanwha Vision Device Manager white paper.
FAQ
Yes. Hanwha Vision posts it as a free download on its tools page.
What does Wisenet Device Manager need to run?64-bit Windows 7, 10 or 11, an 8th-gen Core i5 or better and 8 GB RAM. The installer includes .NET Framework 4.7.2 and the Visual C++ 2010 runtime.
Why doesn't my camera show up in Search?Search only finds devices on the same network as the PC. Add other devices manually by IP range.
Can it set IP addresses on many cameras at once?Yes. Select multiple devices, click IP Assign, enter a starting address, click Simulate to preview, then Apply.