SADP Download
What it is
SADP (Search Active Device Protocol) is Hikvision's Windows tool for finding Hikvision cameras, NVRs and other devices on the local network. It activates new devices by setting the admin password, enables DHCP or sets a static IP address, changes the device ports, and exports and imports the files used for password reset. Hikvision stopped updating SADP in April 2026 and points users to HiTools Delivery, which adds batch upgrade and scenario-based configuration. Source
Works with
| Hikvision network cameras and NVRs | Discovery, activation, DHCP or static IP, port changes Source |
|---|---|
| Cameras behind an NVR | A channel password can be set while activating the NVR to activate its connected cameras Source |
| Devices on other subnets | Found when they are on the same physical network as the PC Source |
System requirements
| Operating system | Windows |
|---|---|
| Download size | 68.27 MB (V3.1.4.6) |
| Network | PC on the same physical network as the devices |
From the Hikvision SADP download page.
How to install
- Download SADP V3.1.4.6 from the Hikvision HiTools page.
- Unzip the download and run the installer.
- Click Next through the install wizard, keep the default settings and click Finish.
- Open SADP. The user manual is in the download package.
From Hikvision: How to download and use the SADP tool.
How to activate a device and set its IP address
- Connect the PC to the same network as the devices and open SADP. Click Refresh to update the list.
- For a device showing Inactive, select it, create and confirm a strong admin password, and click Activate. After activation the device IP is the default 192.168.1.64.
- Select the activated device. Its settings open in the Modify Network Parameters panel.
- Tick Enable DHCP, or enter the IP address, subnet mask, gateway and ports.
- Enter the device admin password and click Modify. A green check with Network Parameters Update confirms the change.
From the Hikvision SADP user manual and Hikvision USA support.
FAQ
V3.1.4.6, posted May 7, 2026. Hikvision stopped updating SADP in April 2026 and recommends HiTools Delivery.
What IP does a Hikvision camera get after activation in SADP?The default 192.168.1.64, per the SADP user manual.
What password rules does activation use?Hikvision recommends at least 8 characters with at least three of: upper case, lower case, numbers and special characters.
Can SADP reset a lost password?SADP exports and imports the XML or GUID files used for Hikvision's password reset process.