Hardware, wiring, setup, programming, defaults, troubleshooting, codes and licensing.
Default logins, installer codes, and reset steps.
80 products. 11 verified. Unverified rows show no codes.
Default codes are for authorized installers. Change defaults at commissioning. No bypass or unauthorized-access instructions.
| Manufacturer | Model | Defaults | Default IP | Status |
|---|---|---|---|---|
| 2GIG | GC2e |
installer 1561 master_user 1111
|
n/a | Verified · 2026-10-17 |
| Axis | Network cameras (AXIS OS) |
username root password none - set on first access
|
AXIS OS 11.11 and earlier: 192.168.0.90/24 if no DHCP. AXIS OS 12.0+: link-local 169.254.x.x. | Verified · 2026-10-17 |
| DMP | XR150/XR550 |
programmer 6653 (PROG), entered after a reset jumper master v193+: unique per panel (algorithm from the serial number); 'initialize codes' reverts it to 99
|
n/a | Verified · 2026-10-17 |
| DSC | PowerSeries Neo HS2016/2032/2064/2128 |
installer 5555 master 1234 (code [01])
|
n/a | Verified · 2026-10-17 |
| Hanwha | Wisenet cameras |
username admin password none - create on first access
|
192.168.1.100 if no DHCP | Verified · 2026-10-17 |
| Hikvision | Network cameras |
username admin password none - device must be activated with a strong password (SADP/web)
|
192.168.1.64 | Verified · 2026-10-17 |
| Mercury | LP1502 |
username admin password password (available for five minutes after DIP switch 1 is toggled; the switch is read on the fly with no reboot)
|
192.168.0.251 / 255.255.0.0, gateway 192.168.0.1, port 3001 | Verified · 2026-10-19 |
| Panasonic i-PRO | Network cameras |
username none - Administrator Registration on first access password set at first access (8-32 chars)
|
192.168.0.10 (DHCP/auto may override) | Verified · 2026-10-17 |
| Qolsys | IQ Panel 4 |
dealer 2222 installer 1111 master 1234
|
Wi-Fi/DHCP | Verified · 2026-10-17 |
| Ubiquiti | UniFi APs/switches |
ssh_recovery ui/ui (older: ubnt/ubnt); adopted devices use controller-set credentials
|
192.168.1.20 (recovery/unadopted) | Verified · 2026-10-17 |
| Vivotek | Network cameras |
username root password none - blank at first login, then you must set one
|
DHCP; APIPA 169.254.x.x without DHCP | Verified · 2026-10-17 |
| 2GIG | Edge | — | — | Being verified |
| 2GIG | GC3 | — | — | Being verified |
| Alarm.com | SEM / Smart Gateway | — | — | Being verified |
| Altronix | LINQ2 | — | — | Being verified |
| Altronix | LINQ8ACM | — | — | Being verified |
| Altronix | NetWay PoE (managed) | — | — | Being verified |
| Amcrest | IP cameras | — | — | Being verified |
| APC | Network Management Card 2/3 | — | — | Being verified |
| APC | Smart-UPS (NMC embedded) | — | — | Being verified |
| Avigilon | ACC NVR appliance | — | — | Being verified |
| Avigilon | H5A cameras | — | — | Being verified |
| Avigilon | Unity Access (ACM) appliance | — | — | Being verified |
| Avigilon Alta (OpenPath) | Smart Hub | — | — | Being verified |
| Axis | Network door controller A1601 | — | — | Being verified |
| Axis | Network I/O / audio | — | — | Being verified |
| Bosch | B5512 / B-Series | — | — | Being verified |
| Bosch | DIVAR IP | — | — | Being verified |
| Bosch | G-Series B9512G | — | — | Being verified |
| Bosch | IP cameras | — | — | Being verified |
| Bosch | Solution 2000/3000 | — | — | Being verified |
| Brivo | ACS300 | — | — | Being verified |
| Cisco | CBS350 | — | — | Being verified |
| Cisco | SG350 | — | — | Being verified |
| Dahua | Network cameras | — | — | Being verified |
| Dahua | NVR (DHI-NVR) | — | — | Being verified |
| DMP | XR500 (legacy) | — | — | Being verified |
| DMP | XT30/XT50 | — | — | Being verified |
| DSC | Impassa SCW9057 | — | — | Being verified |
| DSC | PowerSeries PC1616 | — | — | Being verified |
| DSC | PowerSeries PC1832 | — | — | Being verified |
| ELK | M1 EZ8 | — | — | Being verified |
| ELK | M1 Gold | — | — | Being verified |
| Hanwha | Wisenet NVR | — | — | Being verified |
| HID | Aero X1100A | — | — | Being verified |
| HID | Signo reader (config) | — | — | Being verified |
| Hikvision | AcuSense DVR | — | — | Being verified |
| Hikvision | DS-7600 NVR | — | — | Being verified |
| Honeywell | Lyric | — | — | Being verified |
| Honeywell | ProSeries PROA7PLUS | — | — | Being verified |
| Honeywell | Tuxedo Touch | — | — | Being verified |
| Honeywell | VISTA-128BPT | — | — | Being verified |
| Honeywell | VISTA-15P | — | — | Being verified |
| Honeywell | VISTA-20P | — | — | Being verified |
| Honeywell | VISTA-21iP | — | — | Being verified |
| Interlogix | Concord 4 | — | — | Being verified |
| Interlogix | NetworX NX-8 | — | — | Being verified |
| Interlogix | Simon XT | — | — | Being verified |
| Kantech | KT-1 | — | — | Being verified |
| Kantech | KT-400 | — | — | Being verified |
| Keri | NXT-2D | — | — | Being verified |
| Keri | PXL-500 | — | — | Being verified |
| LenelS2 | LNL-X2220 | — | — | Being verified |
| LifeSafety Power | NetLink NL4 | — | — | Being verified |
| Lorex | IP cameras | — | — | Being verified |
| Lorex | NVR | — | — | Being verified |
| Mercury | MP1502 | — | — | Being verified |
| Napco | Gemini GEM-P9600 | — | — | Being verified |
| Napco | iBridge / StarLink | — | — | Being verified |
| Netgear | M4250 / GS-series | — | — | Being verified |
| Paxton | Net2 Plus ACU | — | — | Being verified |
| Paxton | Paxton10 | — | — | Being verified |
| ProdataKey | Red 1 / Cloud Node | — | — | Being verified |
| Qolsys | IQ Panel 2 | — | — | Being verified |
| Resideo | ProSeries PROA7 | — | — | Being verified |
| Ubiquiti | airMAX (NanoStation/LiteBeam) | — | — | Being verified |
| Ubiquiti | UniFi Cloud Key/UDM | — | — | Being verified |
| Ubiquiti | UniFi Protect cameras | — | — | Being verified |
| Uniview | IPC (v3.05 manual) | — | — | Being verified |
| Uniview | NVR | — | — | Being verified |