Image: Ubiquiti · Field photos are credited to the uploader
Ubiquiti EAV-XG-24-PoE · 1 of 1 · Image: Ubiquiti
Network · Switch Enterprise Audio/Video XG 24 PoE
Specs come from the parts catalog.
| eav-xg-24-poe | eav-xg-24-poe |
Outbound links only. HireLV does not host these files.
Be the first to review this.
Sign in to write a review.
Sign in to add this to your tools.
| Fan | True |
|---|---|
| MAC | 256 |
| PSU | True |
| PoE | 15.4W |
| SMA | 1 (GPS input for Grandmaster clock mode) |
| IPv4 | 256 |
| PoE+ | 30W |
| PTPv2 | True (PTPv2 is not supported over aggregated ports) |
| PoE++ | 60W |
| PoE+++ | 24 |
| QSFP28 | True |
| Weight | Without mounting brackets: 9.85 kg (21.7 lb) With mounting brackets: 9.95 kg (21.9 lb) |
| Console | 1 |
| Layer 3 | True |
| Ethernet | True |
| LLDP MED | True |
| Store SKU | EAV-XG-24-PoE |
| 1 GbE RJ45 | 1 (1G/100M/10M) |
| DHCP Relay | True |
| Dimensions | 442.4 x 480 x 43.7 mm (17.4 x 18.9 x 1.7") |
| Fan Method | (4) Hot-swappable fan modules (Fan modules operate with 3 + 1 redundancy) |
| Management | Ethernet AR Serial Console |
| QoS (DSCP) | True |
| Redundancy | (2) Hot-Swappable PSUs (4) Hot-Swappable Fans |
| STP & RSTP | True |
| Voice VLAN | True |
| 10 GbE RJ45 | 24 (All PoE+++) (10G/5G/2.5G/1G/100M/10M) (10/100M half-duplex not supported) |
| 100G QSFP28 | 4 (100G/40G) (Breakout cables are not supported) |
| Form Factor | Rack Mount (1U, Full-Depth) (Requires a 4-post rack, or a center-mount bracket or cantilever shelf on 2-post racks for optimal support) |
| LCM Display | 1.3" touchscreen |
| Flow Control | True |
| Jumbo Frames | True |
| Power Method | (2) Universal input, 100–240V AC, 50/60 Hz |
| Power Supply | (2) Hot-swappable AC/DC 1,200W power modules |
| IGMP Snooping | True |
| Storm Control | True |
| 802.1X Control | True |
| Certifications | CE, FCC, IC |
| ESD Protection | Air: ± 2KV, contact: ± 8KV |
| Mount Material | SGCC steel |
| NDAA Compliant | True |
| Port Isolation | True |
| Port Mirroring | True |
| Forwarding Rate | 810 Mpps |
| Loop Protection | True |
| Max. PoE Output | Up to PoE+++ |
| Supported VLANs | 1,000 |
| Etherlighting™ | True |
| Heat Dissipation | 512 BTU/hr (Excluding PoE Output) |
| Egress Rate Limit | True |
| Enclosure Material | SGCC steel |
| IPv4 Static Routes | 512 |
| Packet Buffer Size | 8 MB |
| Power Input Method | (2) AC input, Hot-swappable power modules |
| Store listed power | 2150W |
| Switching Capacity | 1,280 Gbps |
| IEEE 1588-2008 PTPv2 | True |
| MAC Address Blocking | True |
| Supported Rack Depth | 482.6 mm (19") four-post racks Posts depths ranging from 650 to 1,000 mm (25.6–39.4”) |
| LACP Port Aggregation | True |
| MAC Address Table Size | 32,000 |
| Max. Power Consumption | 150W (Excluding PoE Output) 2,400W (Including PoE Output) |
| Total PoE Availability | 200-240V AC Shared Mode: 2,150W with (2) 1,200W modules 100-120V AC Shared Mode: 1,850W with (2) 1,200W modules 200-240V AC Redundant Mode: 1,050W with (2) 1,200W modules 100-120V AC Redundant Mode: 850W with (2) 1,200W modules |
| Supported Voltage Range | 100–240V AC |
| DHCP Snooping & Guarding | True |
| Virtual Network Override | True |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| MAC-Based Port Restriction | True |
| DHCP Server (Local Networks) | True |
| Ambient Operating Temperature | -5 to 40° C (23 to 104° F) |
| Total Non-Blocking Throughput | 640 Gbps |
| Configurable PTP Domain Number | True |
| Static Routing (Local Networks) | True |
| End-to-End (E2E) Delay Mechanism | True |
| IP-Based ACLs & Network Isolation | True |
| MAC-Based ACLs & Device Isolation | True |
| Inter-VLAN Routing (Local Networks) | True |
| Multicast & Broadcast Rate Limiting | True |
| Announce Receipt Timeout from 2 to 9 | True |
| Boundary Clock Operation: Two-step Only | True |
| Layer 2 Ethernet and UDP/IPv4 Transport | True |
| BMCA with Configurable Priority1 and Priority2 | True |
| Profiles: IEEE1588, SMPTE 2059-2, AES67, and AES-R16 | True |
| Hardware Timestamping on All Ethernet and QSFP28 Ports | True |
| Sync, Announce, and Delay Request Intervals from −3 to +4 | True |
| Advanced IGMP Configuration (Querier, Fast Leave, Router Port) | True |
| Clock Roles: Grandmaster, Boundary Clock, and Transparent Clock | True |
| Pro AV Profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron) | True |
Distribution partner
Distribution partner coming soon
From Techs
No tech listings for this part yet.
Wanted
No wanted posts yet.
Aliases and rough areas only. No exact locations.
Shop New
0 business listings mention this part.
Guides tagged with the EAV-XG-24-PoE, grouped by type
No Programming guides for the EAV-XG-24-PoE yet. Suggest a guide
No Wiring guides for the EAV-XG-24-PoE yet. Suggest a guide
No Troubleshooting guides for the EAV-XG-24-PoE yet. Suggest a guide
No other Ubiquiti panel guides for the EAV-XG-24-PoE yet. Suggest a guide
No discussions tagged to this part yet.
Be the first to add a field photo of this install.
Manufacturer photos are credited to the vendor. Field photos are real installs, reviewed before they are public, and credited to the uploader. Report a photo. We remove a reported photo within 24 hours.
Real installs only. EXIF and GPS are stripped. A moderator reviews the photo before it is public. An approved photo is credited to your alias.
Sign in to add a field photo.
Report a manufacturer or field photo that should come down.