NFC	NFC
LEDs	R/G/B/W <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
Button	(1) Factory reset
Weight	140 g (4.9 oz)
Speaker	True (Buzzer)
Mounting	Wall mount, gang box mount (Included) Junction box (Optional)
Store SKU	UA-Ultra
Dimensions	126 x 45 x 37.45 mm (4.9 x 1.8 x 1.5")
Connectivity	BLE 4.2 Ethernet
Power Method	PoE+ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
UL 294 Level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
Weatherproof	Outdoor Exposed
Mobile Unlock	True
NFC Frequency	13.56 Mhz
Tamper Switch	True
Certifications	CE, FCC, IC, Anatel: 06371-24-08356, SRRC, UL 294, CAN/ULC-60839-11-1
Lock Terminals	1 Lock Terminal
Mount Material	Stainless steel
NDAA Compliant	True
NFC Read Range	< 50 mm (1.95'')
NFC Technology	ISO 14443A, 14443B, 15693 NFC Tag 1,2,3,4,5 MIFARE Classic MIFARE Plus Mifare Ultralight MIFARE DESFire
Weatherproofing	IP55
UL 294 Statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
ESD/EMP Protection	Air: ± 8kV, contact: ± 4kV
Enclosure Material	Polycarbonate, aluminum alloy
Maximum User Count	3,000
Networking Interface	(1) 10/100 MbE RJ45 port
Powered Output Relay	Lock: 12V DC, 1A
Software Information	The software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a>
Indoor and Outdoor Use	Yes
Management Application	Access
Max. Power Consumption	18W
Supported Voltage Range	44–57V DC
CAN/ULC-60839-11-1 Grade	Grade assignment: I
NFC Card & Keyfob Access	True
PoE Cabling Requirements	Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
Ambient Operating Humidity	5 to 90% noncondensing
Ambient Operating Temperature	-30 to 40° C (-22 to 104° F)
Document number, and issue date and/or revision level	UA-Ultra, V01

Discussions 0 tagged

No discussions tagged to this part yet.

Start a discussion about this part

Ubiquiti UA-Ultra

Documents & links

Reviews

Where to Buy

Guides

Specs

Discussions 0 tagged

Report an issue / Suggest an improvement