Image: Ubiquiti · Field photos are credited to the uploader
Ubiquiti UPS-2U · 1 of 1 · Image: Ubiquiti
Ubiquiti UPS-2U
Power · UPS 2U
Specs come from the parts catalog. Wiring diagram
Reviews
Be the first to review this.
Sign in to write a review.
Add to my tools
Sign in to add this to your tools.
Specs
| Type | Line interactive |
|---|---|
| Power | (1) OVC II AC in: NEMA 5‑15P, 1.8 m (5.9 ft) non-removable power cord (4) Battery backup/surge protection: NEMA 5‑15R (4) Surge protection: NEMA 5‑15R (Outlets are not individually resettable) |
| Status | Off: device not turned on Flashing white: initializing / factory default Steady white: waiting for adoption Steady blue: device adoption and working Flashing blue: battery mode Alternating white/blue: firmware upgrading Rapid flashing blue: locate Steady red: warning Flashing red: low battery |
| Weight | 14 kg (30.9 lb) |
| Buttons | (1) Power (1) Factory reset |
| Runtime | Full load: 2.3 min Half load: 8 min |
| Capacity | 1,440VA/1,000W |
| Store SKU | UPS-2U-US |
| Wave Form | Simulated sine wave (Battery mode) |
| Dimensions | 442.4 x 300 x 87.4 mm (17.4 x 11.8 x 3.4") |
| Management | Ethernet |
| Form Factor | Rack mount (2U) |
| Battery Type | (2) Lead Acid 12V, 9Ah |
| Power Method | (1) TN system, 120V AC, 12A Max., 50/60 Hz |
| Transfer Time | 6 ms typical; 10 ms max. (Battery mode) |
| Certifications | FCC, IC, UL 1778, CSA C22.2 No. 107.3 |
| NDAA Compliant | True |
| Output Voltage | 120V AC |
| Frequency Range | AC mode: 50/60 Hz ±5 Hz (Auto sensing) Battery mode: 60 Hz ±1 Hz |
| Weatherproofing | IP20 |
| Enclosure Material | Galvanized steel |
| Operating Altitude | 3,000 m (1.9 mi) |
| Input Voltage Range | 89–145V AC |
| Networking Interface | (1) 100/10 MbE port for network connection (2) GbE ports for surge in/out |
| AC Voltage Regulation | ±10% (Battery mode) |
| Battery Charging Time | 6-8 hours recovery to 90% capacity |
| Nominal Input Voltage | 120V AC |
| Operating Environment | Pollution Degree 2 |
| Overload at Battery Mode | 110% shutdown in 5 sec 120% shutdown immediately |
| Overload at On-Line Mode | 110% 5 min go to fault 120% go to fault immediately |
| Ambient Operating Humidity | 0 to 95% noncondensing |
| Ambient Storage Temperature | -20 to 50° C (-4 to 122° F) |
| Output Short-Circuit Current | Ipeak 348.0A Irms 115.1A |
| Ambient Operating Temperature | 0 to 40° C (32 to 104° F) |
| Short Circuit Protection at On-Line Mode | Breaker, 250V AC, 15A |
Where to Buy
Distribution partner
Distribution partner coming soon
From Techs
No tech listings for this part yet.
Wanted
No wanted posts yet.
Aliases and rough areas only. No exact locations.
Shop New
0 business listings mention this part.
Guides
Guides tagged with the UPS-2U, grouped by type
Defaults
No Defaults guides for the UPS-2U yet. Suggest a guide
Programming
No Programming guides for the UPS-2U yet. Suggest a guide
Wiring
Troubleshooting
No Troubleshooting guides for the UPS-2U yet. Suggest a guide
Other Ubiquiti panels
No other Ubiquiti panel guides for the UPS-2U yet. Suggest a guide
Discussions 0 tagged
No discussions tagged to this part yet.
Field photos
Be the first to add a field photo of this install.
Manufacturer photos are credited to the vendor. Field photos are real installs, reviewed before they are public, and credited to the uploader. Report a photo. We remove a reported photo within 24 hours.
Add a field photo
Real installs only. EXIF and GPS are stripped. A moderator reviews the photo before it is public. An approved photo is credited to your alias.
Sign in to add a field photo.
Photo takedown
Report a manufacturer or field photo that should come down.