Image: Ubiquiti · Field photos are credited to the uploader
Ubiquiti USW-Industrial-DIN-8-PoE · 1 of 1 · Image: Ubiquiti
Ubiquiti USW-Industrial-DIN-8-PoE
Network · Switch Industrial DIN 8 PoE
Specs come from the parts catalog. Wiring diagram
Documents & links
| usw-industrial-din-8-poe | usw-industrial-din-8-poe |
Outbound links only. HireLV does not host these files.
Reviews
Be the first to review this.
Sign in to write a review.
Add to my tools
Sign in to add this to your tools.
Specs
| MAC | 128 |
|---|---|
| SFP | True |
| IPv4 | 128 |
| PoE++ | 8 |
| 1G SFP | 2 |
| System | True |
| Weight | Without mount: 910 g (2 lb) With plastic mount: 930 g (2.1 lb) |
| Console | 1 |
| Ethernet | True |
| LLDP MED | True |
| Store SKU | USW-Industrial-DIN-8-PoE |
| 1 GbE RJ45 | 8 (All PoE++) |
| Dimensions | 139 x 100 x 52 mm (5.5 x 3.9 x 2.1") |
| Management | Ethernet Serial Console |
| Redundancy | (2) DC inputs |
| STP & RSTP | True |
| Voice VLAN | True |
| Form Factor | Compact DIN rail and wall-mountable (Mounts included) |
| Flow Control | True |
| Jumbo Frames | True |
| Power Method | (2) 2-pin DC inputs with terminal block (Power supply not included) |
| IGMP Snooping | True |
| Storm Control | True |
| 802.1X Control | True |
| Certifications | CE, FCC, IC |
| ESD Protection | Air: ± 15kV, contact: ± 8kV |
| Mount Material | Polycarbonate |
| NDAA Compliant | True |
| Port Isolation | True |
| Port Mirroring | True |
| Forwarding Rate | 14.88 Mpps |
| Loop Protection | True |
| Max. PoE Output | Up to PoE++ |
| Supported VLANs | 1,000 |
| Egress Rate Limit | True |
| Enclosure Material | Aluminum |
| Packet Buffer Size | 0.5 MB |
| Power Input Method | DC input |
| Store listed power | 480W |
| Switching Capacity | 20 Gbps |
| MAC Address Blocking | True |
| LACP Port Aggregation | True |
| MAC Address Table Size | 8,000 |
| Max. Power Consumption | 12W (Excluding PoE Output) 492W (Including PoE Output) |
| Total PoE Availability | Max. 480W (Based on power supply capability) |
| Supported Voltage Range | 44–57V DC (50–57V required for PoE+/PoE++ output) |
| DHCP Snooping & Guarding | True |
| Virtual Network Override | True |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| MAC-Based Port Restriction | True |
| Ambient Operating Temperature | -30 to 70° C (-22 to 158° F) |
| Total Non-Blocking Throughput | 10 Gbps |
| IP-Based ACLs & Network Isolation | True |
| MAC-Based ACLs & Device Isolation | True |
| Multicast & Broadcast Rate Limiting | True |
| Advanced IGMP Configuration (Querier, Fast Leave, Router Port) | True |
Where to Buy
Distribution partner
Distribution partner coming soon
From Techs
No tech listings for this part yet.
Wanted
No wanted posts yet.
Aliases and rough areas only. No exact locations.
Shop New
0 business listings mention this part.
Guides
Guides tagged with the USW-Industrial-DIN-8-PoE, grouped by type
Defaults
No Defaults guides for the USW-Industrial-DIN-8-PoE yet. Suggest a guide
Programming
No Programming guides for the USW-Industrial-DIN-8-PoE yet. Suggest a guide
Wiring
Troubleshooting
No Troubleshooting guides for the USW-Industrial-DIN-8-PoE yet. Suggest a guide
Other Ubiquiti panels
No other Ubiquiti panel guides for the USW-Industrial-DIN-8-PoE yet. Suggest a guide
Discussions 0 tagged
No discussions tagged to this part yet.
Field photos
Be the first to add a field photo of this install.
Manufacturer photos are credited to the vendor. Field photos are real installs, reviewed before they are public, and credited to the uploader. Report a photo. We remove a reported photo within 24 hours.
Add a field photo
Real installs only. EXIF and GPS are stripped. A moderator reviews the photo before it is public. An approved photo is credited to your alias.
Sign in to add a field photo.
Photo takedown
Report a manufacturer or field photo that should come down.