Handbook › Tools › Calculators

Lens & Field of View

Pick a camera from the parts catalog. Field of view comes from its datasheet lens; DORI shows what it can do.

Lens → coverage Coverage → lens

Camera

Camera from the parts catalog

Axis P3265-LVE 9 mm

Not listed? Type the model and we'll add it to the catalog.

Not listed

Axis P3265-LVE 9 mm

1/2.8" · 1920 × 1080
3.4–8.9 mm · HFOV 100°–36°
Datasheet

Distance to target (m)

15 m · 49.2 ft

Target

Or enter a scene width.

Scene width (m)

Lens needed Out of range

Axis P3265-LVE 9 mm can't identify at 15 m. Needs a longer lens than 8.9 mm. At 8.9 mm it gives 197 px/m (Recognize).

PDF Branded PDF CSV

Lens and FOV come from the camera datasheet. DORI thresholds: IEC 62676-4:2014.

Catalog cameras that can

Model	Set lens to	Resolution	At 15 m
Hikvision DS-2CD2786G2-IZS-C	9.3 mm	3840×2160	251.7 px/m · 53.9°
Hikvision DS-2CD2786G2-IZS Discontinued DS-2CD2786G2-IZS-C Discontinued, direct replacement is Hikvision DS-2CD2786G2-IZS-C	9.3 mm	3840×2160	251.7 px/m · 53.9°

Field of view and pixel density

The lens sets the angle; distance turns that angle into a scene width. Divide the camera's horizontal pixels by that width to get pixels per meter or foot.

This tool starts from each camera's datasheet field of view at the wide and tele ends, so the numbers match what the manufacturer publishes.

IEC 62676-4 defines four DORI levels by pixel density on the target: Detect 25 px/m, Observe 62.5 px/m, Recognize 125 px/m and Identify 250 px/m.

FAQ

What are the DORI distances?IEC 62676-4 sets pixel densities on the target: Detect 25 px/m, Observe 62.5 px/m, Recognize 125 px/m and Identify 250 px/m (about 7.6, 19, 38 and 76 pixels per foot).

Why does the field of view match the datasheet?The tool uses each camera's published horizontal and vertical FOV at the wide and tele ends, so real lens distortion is included. Between the ends it interpolates the lens's effective image width.

What is pixels per foot?Horizontal resolution divided by scene width in feet. More pixels per foot means more detail on a face or plate.

What if the camera can't reach my target?Reverse mode tells you when the needed focal length is past the lens range and lists catalog cameras that can reach it.

My camera isn't listed. What now?Type the model and it is sent to the catalog team as a suggestion. Pick a catalog model with the same sensor and lens until it is added.